Can't read dynamic data from NLBA 1. But with EV2300 have no problem
Dynamic data were read correctly on Charge Tab, so communication was Ok at this time. Check the wiring.
Do not select this box when reading Maxim chips or the connection will break.
@djibattworkshop Wiring connection is correct in charging and discharging tab. On Dynamic data tab reading in first second, then going blank.
@torture You are right. But some time when reading cursor coming from up to down, You have to connect wire same second while the cursor on first collum(manufacturer access).
@torture Battery showing locked, but it's not. I can discharge, in main page You can see current is going, led on NLBA1 is on. But unfortunately I cant charge the battery. You can see the photos from charging tab and manual voltage on main tab.
The chip has been reprogrammed so if you know who has done the job i recommend you to contact him.
The cells are garbage but cycle count is 1 and production date is 26.11.2020.
Very Nice.
You have to connect wire same second while the cursor on first collum
Not at all. Use this practice instead of continious read.
- confirm No read button is pressed
- connect wires
- press Read Once button
@torture Cycle count is become one when I replace the cells. The cells are new. Something is wrong with the chip. Showing locket, can discharge but can't charge
Cycle count is become one when I replace the cells.
FCC also became same as Design Capacity magically?
@torture This was a used battery, fuse was blown. After I have changed the cells. About history of this battery, I have no idea.
Cycle count is become one when I replace the cells.
Do you have the very first picture of BatInfo page ?..
@djibattworkshop The begging battery was fully discharged, and fuse was blown, and that time battery was not detected. After the fuse repair I changed the cells and got these values on the photo.
So you dont know initial cycles. Because battery was not read at all due to deep discharge. Wonder why you say cycles were changed to 1 after the cells were replaced.
Latest Post: ASUS C31N1912 chip 045A20 SMP charging current update request Our newest member: murat061918 Recent Posts Unread Posts
