this is log from reset tab:

<

ManufacturerName =
DeviceName =
DeviceChemistry =
DesignCapacity = 5911 mAh
ManufactureDate = 23.8.1991
DesignVoltage = 5911 mV
Temperature = 318,95 C -> Temperature must be within 0-50 C. Warning !
Voltage = 5911 mV
Current = 5911 mA -> Current must be close to 0mA. Reset disabled.
MaxError = 5911 %
RelativeStateOfCharge = 5911 %
RemainingCapacity = 5911 mAh
FullChargeCapacity = 5911 mAh
ChargingCurrent = 5911 mA
ChargingVoltage = 5911 mV
BatteryStatus = 1717
CycleCount = 5911
Cell Voltage1 = 0 mV -> Overdischarged. Reset disabled.
Cell Voltage2 = 0 mV -> Overdischarged. Reset disabled.

1441
Detected chip (database) =
Detected chip (SMBus) = BQ8030 SANYO-DEL [SP_OFF]

1441
Unknown firmware. Try the firmwares from the supported firmware list, maybe it is one of them.

Reset is disabled because there is a big current flowing through the battery. Check your battery connection.
Reset is disabled because the Cell1 is over-discharged. Pre-charge all the cells to at least 3000mV
Reset is disabled because the Cell2 is over-discharged. Pre-charge all the cells to at least 3000mV

>

With dmm I have total 11.58v well balanced. In the laptop, it powers on for 5 seconds then off.

No way for me to reset as the 0v cells reading prevents me from going further.

I need help here.