Notifications
Clear all

[Solved] DELL TYPE T54FJ PLEASE HELP CORRECT BQ8050 EEPROM

Page 2 / 2
samsung87
(@nguyennam141987)
Trusted Member Customer

@djibattworkshop

it stands still at 36%
ReplyQuote
Topic starter Posted : 05/10/2022 9:51 am
DjiBattWorkshop
(@djibattworkshop)
Member Moderator

 Do you have car bulb 12V 21W? 

ReplyQuote
Posted : 05/10/2022 9:52 am
samsung87
(@nguyennam141987)
Trusted Member Customer

@djibattworkshop

Is the current set up?
ReplyQuote
Topic starter Posted : 05/10/2022 10:02 am
samsung87
(@nguyennam141987)
Trusted Member Customer

@djibattworkshop I have

ReplyQuote
Topic starter Posted : 05/10/2022 10:04 am
DjiBattWorkshop
(@djibattworkshop)
Member Moderator

1...2A

 

ReplyQuote
Posted : 05/10/2022 10:05 am
DjiBattWorkshop
(@djibattworkshop)
Member Moderator

 Connect it to device and check if it works stable. 

ReplyQuote
Posted : 05/10/2022 10:06 am
samsung87
(@nguyennam141987)
Trusted Member Customer

 

image

@djibattworkshop

i found the cause, the connection is not sure, i fixed it and now everything is perfect, i will charge it fully and reset it again
ReplyQuote
Topic starter Posted : 05/10/2022 10:08 am
samsung87
(@nguyennam141987)
Trusted Member Customer

@djibattworkshop

image
Drawing is not good. can't charge 100%
only charge to 94%
ReplyQuote
Topic starter Posted : 05/10/2022 12:41 pm
torture
(@torture)
Member Moderator

Post updated screenshot from BATTERY INFO tab including BATTERY STATUS.

ReplyQuote
Posted : 05/10/2022 1:01 pm
samsung87
(@nguyennam141987)
Trusted Member Customer

@torture

image

 

 

image

 

ReplyQuote
Topic starter Posted : 05/10/2022 3:05 pm
DjiBattWorkshop
(@djibattworkshop)
Member Moderator

Go to Charge Tab and continue charging to 100% until Nlba1 will complete charging program. Dont interrupt it manually. 

ReplyQuote
Posted : 05/10/2022 3:17 pm
samsung87
(@nguyennam141987)
Trusted Member Customer

@djibattworkshop OK 

ReplyQuote
Topic starter Posted : 05/10/2022 3:22 pm
samsung87
(@nguyennam141987)
Trusted Member Customer

The problem was solved after running the calibration, thank you

ReplyQuote
Topic starter Posted : 06/10/2022 6:55 am
Page 2 / 2
Share: