You can find the pinout of any battery very easy. The method is described in NLBA user manual chapter 7.

@torture hi i try can find GND and CLK,DAT already but program do not show data i mistake something? thank you

Connect also the + wire and try with POWER ON button.

Also measure the cells voltages.

Also post a good quality close up photo of the 2 chips here.

@torture hi try power on already it still reading data
Battery is 4V

i have 2 battery is same condition.

thank you

Posted by: @sss

hi i try can find GND and CLK,DAT

 Clock and Data looks the same on multimeter check. Try to reverse the wires. 

Hi,
yes i try for reverse wires in loop is not work.

thank you

Check the fuse, sometimes manufacturer feeds Wake-Up line from the fuse instead of Pack+ pin. In this case chip could not be waked up normally by applying external voltage to the pack. In this case fuse control pin should be isolated, fuse recovered and wake-up to retry normal way. 

@djibattworkshop hi thank for your information, I try use external power for change battery as 10v it can read data and reset already.

Thank you.

@sss could you send pinout please?

@turtis 

Have you checked this tutorials https://www.laptopu.ro/community/how-to-reset-and-repair-laptop-battery-tutorial/how-to-find-out-the-battery-pinout-clock-data-and-system-present-pins/ ?

@turtis hi in this picture