Hello
I put a couple of WDX0R and connect wire as picture -1,-2,-3,-4,-5 G, 6 Date ,7 clock and 8,9 V.
but the numbers shows are wrong and the same with the other WDX0R.
I my connect wires to adapter mistakenly, please check out the picture and advice.
1. The pinout is clearly shown in the software. It is tested and 100% correct:
2. Above pinout is battery pinout, you have a cable there that could translate the pinout in a different pinout, do not confuse battery pinout with motherboard pinout.
3. Your NLBA1 device has output voltage while you are touching all NLBA1 pins with fingers, completely forbidden !!!
Buenas tardes sigo con el mismo procedimiento de ubicar los conectores del analizador a la bateria pero no funciona, alguna otra manera o estan erroneos los datos de prueba
@a-mallakpour todavia tienes el problema de lectura de ese modelo de bateria? porque intente y no es posible? he intentado con nuevos pinouts y nada, si sabes de alguna opcion agradeceria la ayuda.
@azzido Good afternoon, I continue with the same procedure of locating the connectors from the analyzer to the battery but it does not work, in some other way or the test data is wrong, do you still have the problem of reading that battery model? Why am I trying and it's not possible? I have tried new pinouts and nothing, if you know of any options I would appreciate the help.
Latest Post: How to Reset, Reprogram and Calibrate BQ20ZXX family chips after battery cells replacement Our newest member: Vincent Lemaire Recent Posts Unread Posts
