hello everyone, can someone help me with a problem with a dji phantom 4 battery, the battery does not charge, I deleted the PF and charged it again but the drone gives me an error, Battery signal error.
maybe someone has encountered such a problem and how they solved it
thanks for your attention, I'm waiting for your opinions !!!
Hi!
Paste BatInfo view from NLBA1 software with battery parameters.
Go to Smbus Tab and run these commands.
WW 00 0054
RBL 23
Paste response here.
P.S.
Please use dedicated snapshot button to make screenshots!
On the pictures you posted there are a lot of unrelevant information.
Switch off the battery by push-button, confirm LEDs are Off, then repeat commands. There is interference from msp430 controller.
bq30z55 registers looks Ok.
Do you still have that "Battery Signal Error" in the DJI Go app?
thank you so much @djibattworkshop !!! the error disappeared and the drone took off, I give it a full charge cycle and check again...
Am verificat din nou drona dupa ce am incarcat complet bateria... inca ok, multumesc lui Nicusor pentru raspunsul rapid pe Watsap si @djibattworkshop pentru ajutor!!!
Latest Post: HP CI03 chip bq30Z55 FW 0.36 still locked after PF clearing Our newest member: TomLightfoot Recent Posts Unread Posts
