One cell was dead (0.8v) and i replaced it, still battery is locked. I get message chip not supported.
Tnx for any help and suggestions.
Boris
Please check all the chips which are supported by the license.
https://www.laptopu.ro/product/laptop-battery-chip-reset-repair-and-program/
i see that chip is supported ? or ?
| Renesas |
045A20 (LGC) |
tnx for patience, i m new with all of this.
Well, Renesas 045A20 chip produced blank and each Pack Maker opted to create their own firmware. Up to now following sets are known
- 045A20 LGC
- 045A20 SMP
- 045A20 SANYO
NLBA1 currently supports 045A20 LGC only like was mentioned on product description page. But your battery was made by Panasonic who tends to use Sanyo firmware as both are trademarks of Japanese Matsushita corporation. It is currently not supported by the software.
Well, Renesas 045A20 chip produced blank and each Pack Maker opted to create their own firmware. Up to now following sets are known
- 045A20 LGC
- 045A20 SMP
- 045A20 SANYO
NLBA1 currently supports 045A20 LGC only like was mentioned on product description page. But your battery was made by Panasonic who tends to use Sanyo firmware as both are trademarks of Japanese Matsushita corporation. It is currently not supported by the software.
ok tnx, now I understand, any hope in near future to support for this one?
045A20 SMP is planned to be added to support, but 045A20 SANYO is not even planned due to very strong protection against unauthorised access to chip parameters.
Latest Post: Asus A32F52 battery has 0V cell 3 voltage after replacing old cells Our newest member: Nazir Ahmed Khwaja Recent Posts Unread Posts
