Hello team, I discharged with 600mA, I think it's good to see now. The battery is OK?
If you want to get actual battery capacity, then run full Calibration cycle. So Charge to Full then Discharge to 3.2v per cell by 0.6a. Consider relaxation periods.
Then chip will update the capacity.
Hello friend, Please look at the Cell 3
voltage is 0.
Open the battery and charge the cells 3 alone upto reach to other cells voltage. Charging current should be between 100ma to 300ma.
Then check, hope your problem will solve.
🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣
Open the battery and charge the cells 3 alone
There is no cell#3 !
Look first at designed parameters like The battery Voltage!
Lets Make NLBA Great ! Together.
@batfix yeah i got it. I didn't read the previous post of this forum. I deleted my answer .sorry to all
My opinion that battery is pretty good.
Ummm... he is getting 7 mAh
7mAh was the capacity discharged over 20 seconds. The capacity is measured in real time.
I'm still skeptical, as on second snapshot the number is 42 mAh after 4+ minutes 🧐
Lets Make NLBA Great ! Together.
First screenshot was made under 2.0a load while second under 0.6a load. Accordingly passed charge is different.
Even under 2.0a load cells deviation is only 2mV!
Which is excellent indicator.
Is it clear now how Real Capacity is measured ?
Latest Post: Asus A32F52 battery has 0V cell 3 voltage after replacing old cells Our newest member: Nazir Ahmed Khwaja Recent Posts Unread Posts
